7075, 7076... Whatever It Takes

The Moon is square
The Moon is square

DAMN IT, WHAT SOUND DOES A PENGUIN MAKE!

Πριν 11 ώρες
buckleyadam4
buckleyadam4

I use HDPE for my chain gaurds/guides. They take alot of punishment and dont break..... dont believe me? Get a piece of 3mm hdpe and beat it with a sledge hamme

Πριν 15 ώρες
Thomas D Harrell
Thomas D Harrell

My bike only has one peg. It’s for a peg leg

Πριν ημέρα
Thomas D Harrell
Thomas D Harrell

Ah yeah uh huh I was gonna say that

Πριν ημέρα
Pillock
Pillock

Clever title reference to Mr. Mom.

Πριν 2 ημέρες
just tim
just tim

You always put a smile on my face. Thanks. Tim

Πριν 2 ημέρες
Nick Borghesan
Nick Borghesan

why not drop a weld in the steel bracket that holds the foot peg

Πριν 3 ημέρες
David Bowden
David Bowden

deep fried foot pegs. How bizarre. JB weld it and forget it.

Πριν 5 ημέρες
Rick Raleigh
Rick Raleigh

"Set screw".

Πριν 6 ημέρες
Paul Tavres
Paul Tavres

I believe its called push back I believe the drooping pegs are for bulleged people

Πριν 7 ημέρες
Paul Tavres
Paul Tavres

My friend was using a hand held router on a large piece of wood chamfering the edge and like yours it caught the edge then the router bit climbed up his arm Never seen such a vicious injury Took a couple surgeries to close about 12” long wound He was a experienced journeyman carpenter Took many months of healing and rehab to get his arm back to normal use Horrible A flying part like that could have also done some serious injury

Πριν 7 ημέρες
gravesdiggerxj
gravesdiggerxj

move that CDI before it gets ruined with you dump the thing. Scorpa has the WORST placement in the world for those. Then go ride more and stop worrying about stupid garbage lol.

Πριν 10 ημέρες
Sytoren Studios
Sytoren Studios

got my sub on the wife joke not gonna lie

Πριν 10 ημέρες
canuckguy worried
canuckguy worried

Why didn't you mention the frame as a option for correcting the pegs?? You have pegs mounted to a frame. .either can be used to resolve your problem...so what material is the frame where the pegs mount?? You can add your material there in various ways..

Πριν 10 ημέρες
canuckguy worried
canuckguy worried

@This Old Tony You only needed a small thickness and you can tack it on for removal...i raced motorcycles for 15 years....it wouldn't do any harm if done right...which your capable of....it probably is damaged there as well?? Slightly but enough to add to the droop ..must have had a heavy rider to bend so much on a Trials bike!! I raced Motocross...

Πριν 10 ημέρες
This Old Tony
This Old Tony

true, but that would result in a permanent modification to the frame.

Πριν 10 ημέρες
Betty Hancock
Betty Hancock

1:35 yeah they were wrong it's not that the rotor is warped it is tiny tiny variations in the thickness of the rotor. Also you most likely got incremental improvements with each repair you did that you didn't notice. But fuck the haters it is what you say it is.

Πριν 11 ημέρες
TrueBlueEG8
TrueBlueEG8

Rotor warp is a bit of a misnomer, discs like these dont tend to warp. Pulsation and run-out is often caused by uneven distribution of burnt on brake linings, or cementation, (the pad material sticking to the disc, in uneven layers) and creating high spots or bumps on the rotor.

Πριν 12 ημέρες
ATMAtim
ATMAtim

😎

Πριν 13 ημέρες
LDN Wholesale
LDN Wholesale

spongy brake. Tapered pads, buckled rotor or rotor worn or machined tapered. Or very maybe a pad sticking in the calliper. Or very maybe a brake hose flexing too much. I have repaired all of those.

Πριν 13 ημέρες
rallyrat
rallyrat

Those for pegs will be fine, as long as the welding temperature didn't spread to places where it's important not to lose your temper...

Πριν 13 ημέρες
Steve Lamperta
Steve Lamperta

Great video...thanks for the laughs.... I'd really like to meet you , I believe we would get along great. I look forward to your video's and have learned so much....Thank you for that...

Πριν 15 ημέρες
Glenn Osmond
Glenn Osmond

"Point number 2nd"..You mean "Point number B!"

Πριν 15 ημέρες
Steve Lescom
Steve Lescom

Funny Guy  !!!

Πριν 15 ημέρες
Big Softy
Big Softy

I can’t believe you ride trials! Thank you.

Πριν 16 ημέρες
Erik Granqvist
Erik Granqvist

I had a new car once. Was not worth it. Let the first owner take the big depreciation for the first year (or years) instead.

Πριν 16 ημέρες
faceup5
faceup5

Get some angled shoes. Problem solved.

Πριν 16 ημέρες
Terry Bloomfield
Terry Bloomfield

Well Tony, you videos are certainly entertaining, sense of humour is a bit " Of the wall" but then I'm British so get it, cheers pal

Πριν 17 ημέρες
Daniel
Daniel

uh a trail bike, are there any street usable trail bikes?

Πριν 17 ημέρες
bitterbaldguy
bitterbaldguy

OH MY GOD! I love this guy!

Πριν 18 ημέρες
chris painter
chris painter

IT TAKES A STRONG MAN TO ADMIT HE SUFFERS FROM PEG DROOP

Πριν 19 ημέρες
Christopher Rouxel
Christopher Rouxel

I made some really weird noises when the chain guard came loose at the last cut. PTSD? Double stick and super glue like nyccnc or tabs option in fusion for the win

Πριν 19 ημέρες
Andrew D
Andrew D

Good piece of entertainment with good chunk of education. Thanks

Πριν 19 ημέρες
Notus Notus
Notus Notus

Love the Mr. Mom credit of the title. "Yeah, 220, 221, whatever it takes". Lol!

Πριν 20 ημέρες
Scot Earp
Scot Earp

How many people actually think a thin rotor couldnt cause soft brakes?? Well, you are all wrong. Hydraulics are simple, volume of master cylinder vs volume of slave cylinder + any extra wear compensation it must perform. Lets say the volume of the slave is 10cc at full pressure with all new components with a release of 5cc into master at rest. Lets say the master has a 7cc volume at rest and the ability to move 5cc at stroke. Well, now lets take some metal off the rotor and increase the volume needed for proper pressure by 3cc. You now have soft spongy brakes.

Πριν 21 ημέρα
Patrick Artner
Patrick Artner

Not a metal worker here - bear with me. Why not glue a spacer on instead of welding?

Πριν 21 ημέρα
Joe Dav
Joe Dav

Screw hole tap it an adjust

Πριν 21 ημέρα
ZLY WEISIOR
ZLY WEISIOR

Fuck you. Why should I say some gross words like these? Thats simple. Because YT comments system allows me to do so. And if I can do something, I usually do it. You thought about my mom for a second, huh? Yes, I do that too.

Πριν 22 ημέρες
KGB2101
KGB2101

A turning radius so tight, I can see back in time! :D

Πριν 22 ημέρες
Matthew Fogarty
Matthew Fogarty

Nobody gets a wife with zero miles, no matter what they say.

Πριν 23 ημέρες
Matthew Fogarty
Matthew Fogarty

@Notus Notus Well, now I can state wholeheartedly that Muslims and women are both fucked in the head. Which are you?

Πριν 15 ημέρες
Notus Notus
Notus Notus

Matthew Fogarty https://youtu.be/KF7ejkBhu1k

Πριν 17 ημέρες
Matthew Fogarty
Matthew Fogarty

@Notus Notus How's that, do you mean cutting their clits off and sharia law? Yeah, that seems completely logical and totally normal. What sane woman wouldn't be down for that? Especially in the name of a made up deity.

Πριν 17 ημέρες
Notus Notus
Notus Notus

Matthew Fogarty #islam is right about women.

Πριν 17 ημέρες
Matthew Fogarty
Matthew Fogarty

@Notus Notus Sure, sure they do. Whatever lets you sleep at night. Besides, they get their virgins when they die, so why worry about just one now?

Πριν 20 ημέρες
Prospect Vic
Prospect Vic

I liked the sneaky cameo appearance of your knee.

Πριν 23 ημέρες
Drakkor Vladimir
Drakkor Vladimir

Wait a minute.......You ride trials????

Πριν 25 ημέρες
Budo 's Workshop
Budo 's Workshop

Why not build out the frame on the bike frame rather then weld the peddles

Πριν 26 ημέρες
Scot Earp
Scot Earp

Which only adds more work. Not a smart idea.

Πριν 24 ημέρες
Tony Himelright
Tony Himelright

Then you grind it back down again.

Πριν 24 ημέρες
Scot Earp
Scot Earp

When you replace the pedals, the builtup metal on the frame would hold them at too great of an angle

Πριν 25 ημέρες
steri skyline
steri skyline

You just can’t help yourself can you? Leading us innocent susceptible viewers a stray, when will you change your ways? “A purple shock” he says as I’m listening to the video while I’m doing my own thing. “Hmm a purple shock I should rewind and check it out” I thought to myself. Well imagine my disappointment when I rewind and see nothing more than a common purple spring. I certainly hope you take a good hard look in the mirror my friend because I will never retrieve my 30 seconds of precious life I wasted on rewinding your misleading video. Nice bike though

Πριν 26 ημέρες
octane
octane

just add material on the frame resting point...

Πριν 27 ημέρες
Craig Sudman
Craig Sudman

You pegged that one, eh?  Thumbs up.

Πριν 28 ημέρες
Jamil
Jamil

ya see what id do, is probabaly glue on some cardboard and call it a day. But I don't have a bike, or a license. Or a bike license.

Πριν 28 ημέρες
MeTube
MeTube

My wife is used too! Works like a charm this little human. A little worn down but in restorable condition.

Πριν 29 ημέρες
slyman920
slyman920

I just have to say that I'm super jealous of your shop I'm no machinist . I'm just a lowly mechanic but I would love to have a lathe, mill, welder ,etc. Just being able to fabricate would make life super easy in some cases.

Πριν 29 ημέρες
relativityboy
relativityboy

Πριν 29 ημέρες
GroovyVideo2
GroovyVideo2

JB weld- done

Πριν μήνα
Orlos The Druid
Orlos The Druid

7075 IS CAST RECYCLED BEER CANS.......

Πριν μήνα
Steven Bodo
Steven Bodo

Another video weld-on.

Πριν μήνα
pennise
pennise

7075 is JB Weld project.

Πριν μήνα
M Reese
M Reese

I think the sharkfin was ment to be a blade. To take off that foot clean before the meat grinder. 😁

Πριν μήνα
Slav Hristoskov
Slav Hristoskov

You are awesome !

Πριν μήνα
The Olmstead Workshop
The Olmstead Workshop

Tony I was to say I clicked your video solely for the Mr Mom reference in your title, and then it was super informative. I was having the same spongy brake problem and ended up replacing pads and calipers while trying to fix it 😑

Πριν μήνα
Christopher Rukas
Christopher Rukas

You should be careful with the material compatibility of Loctite and your plastic.

Πριν μήνα
hustlaz2k
hustlaz2k

5:50 u light up my day! thank u!

Πριν μήνα
Aaron Clodfelter
Aaron Clodfelter

Damn dude. That opening scene made my nutsack curl up. Almost lost my index finger doing just that. Half inch radius round over bit spinning at 20k rippms on a giant pin router. Back side of a guitar body. Hit an inconsistency in the wood and climb cut. Felt like my hand had been smashed with a sledgehammer. Saw what the insides of my finger looked like that day. Can't assume that a bearing bit is a safe alternative to fixturing/templates. I know, who am I to lecture This Old Tony, and glad you still have all your digis. Just saying. Fingies too close to spinnamathing = risky business. I left the guitar shop some time after to go to music school (while I still had ten fingers). Never used that router again, and any time I walked by it while it was in operation I had an uncontrollable need to shove my hands into my back pockets. I have a small shop in the garage these days and still like to make stuff/play with tools that can dismember me, but 100% focus and careful thought and planning are mandatory. I know you know. Again, just saying. So anyway, thanks for all the awesome content, stay safe and Merry Christmas!

Πριν μήνα
Dave Dennis
Dave Dennis

Tony, you certainly know how to make learning fun. I laugh and learn from all your videos. Thanks. Keep it up.

Πριν μήνα
Eric Brandt
Eric Brandt

In case the You Tube thing doesn't work out for you....My nephew who I steered towards going to college and is a CnC machinist now.....Steered me to you channel.....Well if You Tube doesn't work out there's always making aftermarket parts for obscure exotic Trails bikes! 🤣

Πριν μήνα

Επόμενο

Scorpa trials

4:28

Scorpa trials

sambrice

προβολές 122

Sherco et Scorpa Academy 2016

8:41

Sherco et Scorpa Academy 2016

trialclubcom

προβολές 13

scorpa 300 2018

2:28

scorpa 300 2018

silvano brambilla

προβολές 5

Scorpa~Bersamamu (official video)

4:48

Scorpa~Bersamamu (official video)

SCORPA OFFICIAL

προβολές 8

2018 SCORPA TRIALS BIKE REVIEW

16:09

2018 SCORPA TRIALS BIKE REVIEW

JoeyMac420

προβολές 244

Scorpa 4-Tricks

0:31

Scorpa 4-Tricks

leosuncle

προβολές 4

Présentation Trial SCORPA Twenty 300 de 2016

6:41

WM : DRIFT Vélo Trial SCORPA

3:00

WM : DRIFT Vélo Trial SCORPA

Wheel i am

προβολές 4

Trial Training Scorpa SY 250

1:30

Trial Training Scorpa SY 250

Jonathan

προβολές 11

Scorpa T-Ride 280 2015

3:20

Scorpa T-Ride 280 2015

FormulaMoto

προβολές 10

Scorpa TY125F 2019

0:51

Scorpa TY125F 2019

Quad Challenge

προβολές 2

Sherco et Scorpa : trial made in France aux SSDT 2011

4:17

SCORPA T RIDE 250 F

4:37

SCORPA T RIDE 250 F

Leo Navarro Latorre

προβολές 17

La Scorpa incastrata

4:40

La Scorpa incastrata

motoclubileoni

προβολές 1

War Dragons | Scorpa Dragon Spotlight

1:12

War Dragons | Scorpa Dragon Spotlight

War Dragons

προβολές 5

Scorpa 125

9:03

Scorpa 125

Mark Deamer

προβολές 25

Test Scorpa & Sherco 2017 www.infotrial.it

1:59

Test Scorpa & Sherco 2017 www.infotrial.it

INFOTRIAL

προβολές 12

scorpa long-ride

1:40

scorpa long-ride

uralretro750

προβολές 23